Tryag File Manager

//usr/share/byobu/status/statusrc

#    statusrc - Byobu's default status configurations
#
#      Override these in $BYOBU_CONFIG_DIR/statusrc
#      where BYOBU_CONFIG_DIR is XDG_CONFIG_HOME if defined,
#      and $HOME/.byobu otherwise.
#
#    Copyright (C) 2009-2011 Canonical Ltd.
#
#    Authors: Dustin Kirkland <kirkland@byobu.org>
#
#    This program is free software: you can redistribute it and/or modify
#    it under the terms of the GNU General Public License as published by
#    the Free Software Foundation, version 3 of the License.
#
#    This program is distributed in the hope that it will be useful,
#    but WITHOUT ANY WARRANTY; without even the implied warranty of
#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#    GNU General Public License for more details.
#
#    You should have received a copy of the GNU General Public License
#    along with this program.  If not, see <http://www.gnu.org/licenses/>.

# Configurations that you can override; if you leave these commented out,
# Byobu will try to auto-detect them.

# This should be auto-detected for most distro, but setting it here will save
# some call to lsb_release and the like.
#BYOBU_DISTRO=Ubuntu

# Default: depends on the distro (which is either auto-detected, either set
# via $DISTRO)
#LOGO="\o/"

# Abbreviate the release to N characters
# By default, this is disabled.  But if you set RELEASE_ABBREVIATED=1
# and your lsb_release is "precise", only "p" will be displayed
#RELEASE_ABBREVIATED=1

# Default: /
#MONITORED_DISK=/

# Minimum disk throughput that triggers the notification (in kB/s)
# Default: 50
#DISK_IO_THRESHOLD=50

# Default: eth0
#MONITORED_NETWORK=eth0

# Unit used for network throughput (either bits per second or bytes per second)
# Default: bits
#NETWORK_UNITS=bytes

# Minimum network throughput that triggers the notification (in kbit/s)
# Default: 20
#NETWORK_THRESHOLD=20

# You can add an additional source of temperature here
#MONITORED_TEMP=/proc/acpi/thermal_zone/THM0/temperature

# Default: C
#TEMP=F

#SERVICES="eucalyptus-nc|NC eucalyptus-cloud|CLC eucalyptus-walrus eucalyptus-cc|CC eucalyptus-sc|SC"

#FAN=$(find /sys -type f -name fan1_input | head -n1)

# You can set this to 1 to report your external/public ip address
# Default: 0
#IP_EXTERNAL=0

# The users notification normally counts ssh sessions; set this configuration to '1'
# to instead count number of distinct users logged onto the system
# Default: 0
#USERS_DISTINCT=0

# Set this to zero to hide seconds int the time display
# Default 1
#TIME_SECONDS=0